🔌 EV Charger Permit in Bloomington, MN

Exact fees, requirements, and timelines for Bloomington — verified from official sources. Use our free AI tool to get a permit report in 5 seconds.

Check My Permit Requirements Free →

📋 Quick Facts — EV Charger Permit in Bloomington

DetailInfo
Permit Required?Yes — in most cases
Permit TypeElectrical Permit
Permit OfficeCity of Bloomington Building Inspections
Phone(952) 563-8930
HoursMon–Fri 8am–4:30pm
Online PortalApply Online
Fee / TimelineCurrent Data
EV Charger Permit FeeMN DLI state electrical permit — NOT city.
Approval Time1–5 business days
NEC Edition (MN)2023 (with extensive state amendments — MSEC)
Permit AuthorityStatewide. Minnesota Department of Labor and Industry.
📍 Office Address: 1800 W. Old Shakopee Road, Bloomington, MN 55431

Do I Need a EV Charger Permit in Bloomington?

The short answer: almost always yes. REQUIRED for any new dedicated circuit or hardwired EV charger installation — and Bloomington is no exception. The City of Bloomington Building Inspections enforces electrical permit requirements for residential and commercial work.

✅ Work That Always Requires a Permit

  • Installing a new 240V dedicated circuit for Level 2 charging
  • Hardwired EVSE (Electric Vehicle Supply Equipment) installation
  • Installing NEMA 14-50 outlet on new circuit
⚠️ Don't skip the permit. Working without a permit in Bloomington can result in stop-work orders, fines, failed home sales, and liability if the work causes damage or injury.

💰 EV Charger Permit Fees in Bloomington (2026)

Permit fees in Bloomington are set by City of Bloomington Building Inspections. Here's the current fee structure for ev charger work:

Fee ItemAmount
EV Charger PermitMN DLI state electrical permit — NOT city.

VERIFIED from bloomingtonmn.gov: Residential roofing permit = $100 flat; siding = $150; combined = $250. HVAC/plumbing: minimum residential fees with MN state surcharge. Plan review fee: 10% when job valuation exceeds $50,000.

* Fees may change. Always verify current rates with City of Bloomington Building Inspections at https://www.bloomingtonmn.gov/bldg/permit-information-and-fees.

🔍 Inspection Requirements

After the permit is issued, Bloomington requires inspections at key stages. Do not cover work before it's inspected.

  • Rough-in Inspection: Wire sizing, conduit installation, proper grounding verified before covering.
  • Final Inspection: EVSE unit installed and tested, GFCI functional, circuit labeled in panel.

📝 How to Apply for a EV Charger Permit in Bloomington

  1. Verify your contractor is licensed — Licensed Electrician in most states. Homeowners can pull in some states for owner-occupied homes..
  2. Gather required documents — Equipment specs, site plan, load calculations where applicable.
  3. Submit the application — Online at City of Bloomington Building Inspections or in person.
  4. Pay the permit fee — MN DLI state electrical permit — NOT city..
  5. Post the permit — Keep a copy on-site until all inspections pass.
  6. Schedule inspections — Do not cover work until the inspector signs off.

📌 Minnesota State Requirements

In addition to Bloomington's local rules, these state-level requirements apply:

  • 2026 NEC currently under review — update coming
  • Extensive state amendments to NEC — the Minnesota State Electrical Code (MSEC) differs from NEC in meaningful ways
  • Licensed Electrical Contractor required
  • Minneapolis and St. Paul have own permit offices but follow state code

→ Minnesota Licensing Board

🚫 Common EV Charger Permit Mistakes in Bloomington

  • Not checking panel capacity before installing — often triggers unexpected panel upgrade
  • Missing GFCI protection (NEC 625.22 requirement — strictly enforced)
  • Incorrect wire sizing — must be 125% of charger continuous load per NEC 625.42
  • Not pulling a permit — common because homeowners assume plug-in = no permit

💡 Pro Tips from Contractors

  • Most EV charger permits are over-the-counter same day — low complexity for inspectors
  • CA, WA, and OR have been pushing for pre-wired EV circuits in all new construction — check if rough-in already exists in newer homes
  • Many utilities offer rebates for EV charger installation — permit is required to claim them

Notes specific to Bloomington:

  • Residential roofing: $100 flat fee (VERIFIED)
  • MN DLI electrical permits — not city
  • 4th largest MN city — active market
  • Plan review: 10% of permit fee for jobs over $50,000

Get Your Exact EV Charger Permit Requirements in 5 Seconds

Our AI searches live building department data for Bloomington and all 50 states — returning the exact permit requirements, fees, and application links for your job. No hold music. No guessing.

Run a Free Permit Check →

❓ Frequently Asked Questions

Do I need a ev charger permit in Bloomington, MN?

Yes, in most cases. REQUIRED for any new dedicated circuit or hardwired EV charger installation. In Bloomington, contact City of Bloomington Building Inspections at https://www.bloomingtonmn.gov/bldg/permit-information-and-fees.

How much does a ev charger permit cost in Bloomington?

In Bloomington: MN DLI state electrical permit — NOT city.. Fees may change — always confirm with City of Bloomington Building Inspections before applying.

How long does a ev charger permit take in Bloomington?

1–5 business days. Simple residential trade work is often issued same-day or within 1–3 business days.

Who can pull a ev charger permit in Minnesota?

Licensed Electrician in most states. Homeowners can pull in some states for owner-occupied homes.

🔗 Related Permit Pages

Other trades in Bloomington:

Other cities in Minnesota:

→ Full Minnesota Permit Guide