📋 Quick Facts — Electrical Permit in Aurora
| Detail | Info |
|---|---|
| Permit Required? | Yes — in most cases |
| Permit Type | Electrical Permit |
| Permit Office | City of Aurora Building Division |
| Phone | (303) 739-7420 |
| Hours | Mon–Fri 8am–5pm |
| Online Portal | Apply Online |
| Fee / Timeline | Current Data |
|---|---|
| Electrical Permit Fee | Same cost structure. Panel: $150–$350 estimated. |
| Approval Time | 1–3 business days |
| NEC Edition (CO) | 2023 |
| Permit Authority | Denver and state buildings only. Other jurisdictions have 'home rule' — each cit |
Do I Need a Electrical Permit in Aurora?
The short answer: almost always yes. REQUIRED for any work that adds, modifies, or extends electrical circuits — and Aurora is no exception. The City of Aurora Building Division enforces electrical permit requirements for residential and commercial work.
✅ Work That Always Requires a Permit
- Electrical panel upgrade (100A to 200A, or 200A to 400A)
- Service entrance upgrade
- Level 2 EV charger installation (new dedicated 240V circuit)
- Subpanel installation
- Adding new circuits to existing panel
- New electrical service to an outbuilding or addition
- Any work on main service equipment
- Installing whole-home generator transfer switch
⚠️ Work That May Be Exempt
- Replacing a like-for-like outlet or switch (same circuit, no new wiring)
- Replacing fixtures on existing circuits (most jurisdictions)
- Minor repair work — check with AHJ
💰 Electrical Permit Fees in Aurora (2026)
Permit fees in Aurora are set by City of Aurora Building Division. Here's the current fee structure for electrical work:
| Fee Item | Amount |
|---|---|
| Electrical Permit | Same cost structure. Panel: $150–$350 estimated. |
VERIFIED: Aurora uses permit fees + plan review + applicable taxes (auroragov.org). Fee calculator: auroragov.org/business_services/building_division/permit_fee_calculator. Aurora requires separate mechanical contractor licensing through city building dept.
* Fees may change. Always verify current rates with City of Aurora Building Division at https://www.auroragov.org/business_services/building_division.
🔍 Inspection Requirements
After the permit is issued, Aurora requires inspections at key stages. Do not cover work before it's inspected.
- Rough-in Inspection: Inspector checks all new wiring, conduit, junction boxes, and panel work before drywall is closed. Wire sizing, circuit breaker sizing, and grounding/bonding checked.
- Service/Panel Inspection: Inspector verifies panel installation, proper breaker sizing, neutral/ground bus connections, labeling, and AFCI/GFCI requirements per NEC.
- Final Inspection: Confirms all circuits are working, proper GFCI protection in wet areas, smoke/CO detectors functional, panel is properly labeled.
📝 How to Apply for a Electrical Permit in Aurora
- Verify your contractor is licensed — Licensed Master Electrician or Electrical Contractor in most states. Some states (TX, AZ, CO) allow homeowners to pull permits for owner-occupied residences. Always verify with local AHJ..
- Gather required documents — Equipment specs, site plan, load calculations where applicable.
- Submit the application — Online at City of Aurora Building Division or in person.
- Pay the permit fee — Same cost structure. Panel: $150–$350 estimated..
- Post the permit — Keep a copy on-site until all inspections pass.
- Schedule inspections — Do not cover work until the inspector signs off.
📌 Colorado State Requirements
In addition to Aurora's local rules, these state-level requirements apply:
- Denver has its own permit system — Denver Community Planning and Development
- Colorado Springs, Fort Collins, Boulder all have own permit offices
- Mountain towns (Aspen, Vail) — very strict, slow permit process, high fees
- Front Range: Class 4 hail-resistant roofing common due to insurance requirements
🚫 Common Electrical Permit Mistakes in Aurora
- Not checking if panel has sufficient capacity before quoting EV charger — often triggers panel upgrade
- Missing AFCI protection on bedrooms (required by NEC 2014+)
- Improper grounding electrode system — common fail point on panel upgrades
- Not labeling all breakers before final inspection
💡 Pro Tips from Contractors
- For panel upgrades, call the utility first — they need to pull the meter and may have scheduling delays (1–3 weeks)
- EV charger permits are typically over-the-counter in most cities — fast to pull
- NEC 2023 now requires EV-ready circuits in new construction — some jurisdictions have adopted this
- If work involves utility-side of meter, a utility disconnect permit is separate from building department
Notes specific to Aurora:
- Use online fee calculator: auroragov.org permit fee calculator
- Aurora requires mechanical contractor licensing (city-level)
- Spans 3 counties — one city permit office
- Colorado HVAC licensing required
Get Your Exact Electrical Permit Requirements in 5 Seconds
Our AI searches live building department data for Aurora and all 50 states — returning the exact permit requirements, fees, and application links for your job. No hold music. No guessing.
Run a Free Permit Check →❓ Frequently Asked Questions
Do I need a electrical permit in Aurora, CO?
Yes, in most cases. REQUIRED for any work that adds, modifies, or extends electrical circuits. In Aurora, contact City of Aurora Building Division at https://www.auroragov.org/business_services/building_division.
How much does a electrical permit cost in Aurora?
In Aurora: Same cost structure. Panel: $150–$350 estimated.. Fees may change — always confirm with City of Aurora Building Division before applying.
How long does a electrical permit take in Aurora?
1–3 business days. Simple residential trade work is often issued same-day or within 1–3 business days.
Who can pull a electrical permit in Colorado?
Licensed Master Electrician or Electrical Contractor in most states. Some states (TX, AZ, CO) allow homeowners to pull permits for owner-occupied residences. Always verify with local AHJ.